...input logic for an easy-to-use, two- or three-wire serial interface. In a system with several MAX500s, only one serial data line is required...four DACs to be updated simultaneously using one control signal. There are three reference inputs so...
Description
CMOS, Quad, Serial Interface 8-Bit DAC From old datasheet system CMOS, Quad, Serial-Interface 8-Bit DAC CMOS / Quad / Serial-Interface 8-Bit DAC
...100F range. The MAX681 contains two 1.5F capacitors as C1 and C2, and two 2.2F capacitors as C3 and C4. See Typical Operating Characteristic...four capacitors are low-cost, 10F or 22F polarized electrolytics. When using the MAX680 for low-curr...
Description
5V to 0V Voltage Converters Octal Buffers And Line Drivers With 3-State Outputs 20-CDIP -55 to 125 30 AMP MINIATURE POWER RELAY 5V to 【10V Voltage Converters 5V to 10V Voltage Converters 5V to ±10V Voltage Converters
...e Reset: A high on this pin for two machine cycles while the oscillator is running, resets the device. An internal diffused resistor to VSS permits a power-on reset using only an external capacitor to VCC. Address Latch Enable/Program Pulse...
Description
8-bit CMOS (low voltage, low power and high speed) microcontroller families 80C51 8-bit microcontroller family 8K.64K/256.1K OTP/ROM/ROMless low voltage 2.7V.5.5V low power high speed 33 MHz 80C51 8-bit microcontroller family 8K.64K/256.1K OTP/ROM/ROMless, low voltage 2.7V.5.5V, low power, high speed 33 MHz
...ric Quad Flat Package P-MQFP-80 two temperature ranges available: 0 to 70 C (for 12, 16, 20 MHz) - 40 to 85 C (for 12, 16 MHz)
The SAB 80...four memory address spaces described below: Figure 1 illustrates the memory address spaces of the SA...
...rter with 12 multiplexed inputs two full duplex serial interfaces with programmable Baudrate-Generators Fully upward compatible with SAB 80C...four physically distinct blocks: - the lower 128 bytes of RAM including four banks containing eight ...
Description
8-Bit CMOS Single-Chip Microcontroller From old datasheet system