...impedance are invoked from just two control pins with TTL/CMOS compatible levels. The combination of an extremely low RDS ON and the use of ...four output stages commonly and the error flag is set with a delay. e. Open Load Detection The outpu...
Description
5-A H-Bridge for DC-Motor Applications Smart Motorbridges Driver ICs - 5A H-Bridge for DC Motor
...brake low are invoked from just two control pins with TTL/CMOS compatible levels. The combination of an extremely low RDS ON and the use of ...four output stages commonly and the error flag is set with a delay.
Data Sheet
6
2001-06-19...
...lay Time ( CS high time between two accesses) Data Valid Time CL = 50 pF CL = 100 pF8 CL = 220 pF8
tvalid
7
This time is necessary ...four output stages has its own zener clamp, which causes a voltage limitation at the power transisto...
...otor or bidirectionally control two dc motors. Both bridges are capable of sustaining 45 V and include internal pulse-width modulation (PWM)...four drivers in the bridge output can be turned OFF between steps (l0 = l1 2.4 V) resulting in a fa...
... phase comparators to implement two phase-locked loops. The device is designed to operate from 3 NiCd cells, in pocket phones, with low curr...four bits are an address field. The UMA1020AM uses 5 of the 16 available addresses. The data format ...
Description
Low-voltage dual frequency synthesizer for radio telephones
... been opened Caution Do not use two or more soldering methods in combination (except partial heating).
10
PD16808
[MEMO]
11
PD16808
[MEMO]
No part of this document may be copied or reproduced in any form or by any means wit...
...ting
-
Caution Do not use two or more soldering methods in combination (except partial heating).
10
PD16814
NOTES FOR CMOS DEVICES
1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note: Strong electric field, when exposed to a...
... sets. This driver IC can drive two stepping motors at the same time, and is ideal for driving stepping motors in the lens of a video camera.
FEATURES
* Four H bridge circuits employing power MOS FETs * Low current consumption by elimin...
...output stage H bridge circuits, two low-ON resistance H bridge circuits for driving actuators, and another two channels for driving sled mot...Four H bridge circuits employing power MOS FETs * High-speed PWM drive: Operating frequency: 120 kHz...
...in. This product builds in each two circuits of the power switch, control-pins and flag-pins, and this IC can be able to control the power supply bus in 2 USB port. There are four kinds of this product by the input logic of the control sign...