shielded pdf Datasheet P11 Full Text Search --- IC-ON-LINE

shielded Datasheet PDF File

For shielded Found Datasheets File :: 9651 Search Time::1.063ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | <11> | 12 | 13 | 14 | 15 |

				MICRO-LINEAR[Micro Linear Corporation]
Part No.	ML6672 ML6672CH ML6672CQ
OCR Text	...y 5 Unshielded Twisted Pair and shielded Twisted Pair cables. The ML6672 is compliant with the ATM Forum 155Mbps Twisted Pair Specification. The adaptive equalizer in the ML6672 will accurately compensate for line losses of up to 100m of UT...
Description	ATM UTP Transceiver
File Size	247.79K / 8 Page	View it Online	Download Datasheet

				PMC-Sierra, Inc. PMC[PMC-Sierra, Inc] PMC-Sierra Inc
Part No.	PM5347 PM5347-RI
OCR Text	...ic, Unshielded Twisted Pair and shielded interfaces. * Processes all SONET/SDH UNI overhead. * Provides access to section and line datalinks and all additional transport and path overhead to allow additional external processing for full SON...
Description	SATURN USER NETWORK INTERFACE PLUS(155.52 MBIT/S & 51.84 MBIT/S, PLUS) 155 Mb/s SATURN User Network Interface for WANs SATURN USER NETWORK INTERFACE PLUS(155.52 MBIT/S & 51.84 MBIT/S, "PLUS")
File Size	38.05K / 2 Page	View it Online	Download Datasheet

				Conexant
Part No.	CX74017
OCR Text	...rk area Transport device in ESD shielded containers Monitor and test all ESD protection equipment Treat the CX74017 as extremely sensitive to ESD TDMA Slots Rx Slot RxENA T1 T_H T2 T3 FEENA T4 C899 Figure 3. CX74017 Sample and ...
Description	RF Transceiver for GSM/GPRS Applications From old datasheet system
File Size	119.82K / 16 Page	View it Online	Download Datasheet

				HITTITE[Hittite Microwave Corporation]
Part No.	HMC346
OCR Text	...ents while bias is applied. Use shielded signal and bias cables to minimize inductive pick-up. General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the chip has fragile...
Description	GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR DC - 20 GHz GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, DC - 20 GHz
File Size	242.04K / 6 Page	View it Online	Download Datasheet

				INFINEON[Infineon Technologies AG]
Part No.	V23826-K15-C13 V23826-K15-C313 V23826-K15-C353 V23826-K15-C363 V23826-K15-C373 V23826-K15-C53 V23826-K15-C63 V23826-K15-C73 FC1.25GBIT/SSC1X933V FC1.25GBIT/SSC1X95V
OCR Text	...vides the duplex SC opening. If shielded parts are employed, they should be in proper contact with the bezel (back plane). Since the shield is galvanically isolated from signal ground it is strongly recommended to prevent any contact betwee...
Description	Transceivers by Form-factor MSA - Single Mode 1300 nm 1.0625 GBd Fibre Channel 1.3 Gigabit Ethernet 1x9 Transceiver IC LOGIC 244 CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS TOLERANT I/O 3.3V -40 85C SOIC-20 37/TUBE
File Size	403.55K / 16 Page	View it Online	Download Datasheet

				Electronic Theatre Controls, Inc. ETC[ETC] List of Unclassifed Manufacturers
Part No.	DAC488HR DAC488HR_2 DAC488HR_4 4 DAC488HR/2 DAC488HR/4
OCR Text	...emory expansion for one channel shielded cable with male DB9 connector for analog output, 6 ft. shielded cable with male DB15 connector for digital I/O, 6 ft. DAC488HR master/slave cable, 3 ft. shielded IEEE 488 cable, 6 ft. LabVIEW(R) driv...
Description	16-bit D/A Converter with Digital I/O & IEEE 488
File Size	189.27K / 4 Page	View it Online	Download Datasheet

				HITTITE[Hittite Microwave Corporation]
Part No.	HMC347
OCR Text	...ents while bias is applied. Use shielded signal and bias cables to minimize inductive pick-up. General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the chip has fra...
Description	GaAs MMIC SPDT NON-REFLECTIVE SWITCH/ DC - 20.0 GHz GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 20.0 GHz GaAs MMIC SPDT NON-REFLECTIVE SWITCH DC - 20.0 GHz
File Size	159.33K / 6 Page	View it Online	Download Datasheet

				美国讯泰微波有限公司上海代表 HITTITE[Hittite Microwave Corporation]
Part No.	HMC442
OCR Text	...ents while bias is applied. Use shielded signal and bias cables to minimize inductive pick-up. General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the chip has fra...
Description	800000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 17.5 - 25.5 GHz
File Size	229.64K / 8 Page	View it Online	Download Datasheet

For shielded Found Datasheets File :: 9651 Search Time::1.063ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | <11> | 12 | 13 | 14 | 15 |